440 roller cam advice needed **UPDATE***

Print Thread

Re: 440 roller cam advice needed [Re: hemigod426] #925841 02/11/11 04:06 AM 02/11/11 04:06 AM
Joined: Oct 2003 Posts: 3,698 NE Oklahoma V Von master
Von master V Joined: Oct 2003 Posts: 3,698 NE Oklahoma	[quotedoes porter grind them or just pick out cams and have someone else cut it? Porter picks out the lobes, Comp grinds them. 72 RR, Pump gas 440, 452s, 3800 lbs, Corked, ET Radials,. 11.33@117.72. Same car, bone stock 346s, 9.5 comp, baby solid. 12.24@110.

Entire Thread
Subject	Posted By	Posted
440 roller cam advice needed UPDATE*	Kern Dog	02/11/11 01:51 AM
Re: 440 roller cam advice needed	AndyF	02/11/11 02:00 AM
Re: 440 roller cam advice needed	440forPOWER	02/11/11 02:16 AM
Re: 440 roller cam advice needed	Von	02/11/11 02:21 AM
Re: 440 roller cam advice needed	Tech Instructor	02/11/11 02:25 AM
Re: 440 roller cam advice needed	Kern Dog	02/11/11 03:06 AM
Re: 440 roller cam advice needed	440forPOWER	02/11/11 03:16 AM
Re: 440 roller cam advice needed	Von	02/11/11 03:47 AM
Re: 440 roller cam advice needed	hemigod426	02/11/11 06:11 AM
Re: 440 roller cam advice needed	Von	02/11/11 08:06 AM
Re: 440 roller cam advice needed	Kern Dog	02/11/11 05:17 AM
Re: 440 roller cam advice needed	red79	02/11/11 05:50 AM
Re: 440 roller cam advice needed	Kern Dog	02/11/11 06:56 AM
Re: 440 roller cam advice needed	Dcuda69	02/12/11 04:39 AM
Re: 440 roller cam advice needed	dodgeboy11	02/14/11 06:03 AM
Re: 440 roller cam advice needed	Kern Dog	02/15/11 06:37 AM
Re: 440 roller cam advice needed	Fury Fan	02/15/11 02:51 PM
Re: 440 roller cam advice needed	Von	02/11/11 08:05 AM
Re: 440 roller cam advice needed	frank	02/12/11 03:26 AM
Re: 440 roller cam advice needed	ahy	02/12/11 04:04 AM

Hop To