440 roller cam advice needed **UPDATE***

Print Thread

Re: 440 roller cam advice needed [Re: Kern Dog] #925834 02/10/11 11:16 PM 02/10/11 11:16 PM
Joined: Jan 2003 Posts: 2,023 Lincoln NE 4 440forPOWER super gas
440forPOWER super gas 4 Joined: Jan 2003 Posts: 2,023 Lincoln NE	Hello, no Dwayne is not at Hughes. He has his own machine shop. The cam button is used to correct/adjust the camshaft end play for a roller. What cams have you had problems with wiping lobes?

Entire Thread
Subject	Posted By	Posted
440 roller cam advice needed UPDATE*	Kern Dog	02/11/11 01:51 AM
Re: 440 roller cam advice needed	AndyF	02/11/11 02:00 AM
Re: 440 roller cam advice needed	440forPOWER	02/11/11 02:16 AM
Re: 440 roller cam advice needed	Von	02/11/11 02:21 AM
Re: 440 roller cam advice needed	Tech Instructor	02/11/11 02:25 AM
Re: 440 roller cam advice needed	Kern Dog	02/11/11 03:06 AM
Re: 440 roller cam advice needed	440forPOWER	02/11/11 03:16 AM
Re: 440 roller cam advice needed	Von	02/11/11 03:47 AM
Re: 440 roller cam advice needed	hemigod426	02/11/11 06:11 AM
Re: 440 roller cam advice needed	Von	02/11/11 08:06 AM
Re: 440 roller cam advice needed	Kern Dog	02/11/11 05:17 AM
Re: 440 roller cam advice needed	red79	02/11/11 05:50 AM
Re: 440 roller cam advice needed	Kern Dog	02/11/11 06:56 AM
Re: 440 roller cam advice needed	Dcuda69	02/12/11 04:39 AM
Re: 440 roller cam advice needed	dodgeboy11	02/14/11 06:03 AM
Re: 440 roller cam advice needed	Kern Dog	02/15/11 06:37 AM
Re: 440 roller cam advice needed	Fury Fan	02/15/11 02:51 PM
Re: 440 roller cam advice needed	Von	02/11/11 08:05 AM
Re: 440 roller cam advice needed	frank	02/12/11 03:26 AM
Re: 440 roller cam advice needed	ahy	02/12/11 04:04 AM

Hop To