Yep its the hi vibration blaster 2 coil & is epoxy filled. I think I will go with the .25 resistor & grab an .8 as well just in case. Not sure why running a .25 on the street will hurt anything if the coil is ok withhout one.
It is a simple subject but still enough to keep me second guessing myself. The only other thing that may matter is if too much voltage gets to the coil which is why I am going to grab the .8 ballast. The 1.25 ohm resister I am curentlty running is gettting put in the glove box for backup either way.
