Pinion seal replacement

Print Thread

Pinion seal replacement #91795 07/20/08 11:45 PM 07/20/08 11:45 PM
Joined: Jan 2003 Posts: 512 Niwot, CO Formerly denn... dynorad OP mopar
dynorad OP mopar Joined: Jan 2003 Posts: 512 Niwot, CO Formerly denn...	I have a 742 center section rear axle with a leaking pinion seal. 1. The FSM says to use a special tool to set seal depth when installing a new seal. Do I need it? Is the a shadetree way to get the seal depth right? 2. Will I be able to replace the yoke after the seal replacement without affecting bearing preload? 3. How do you torque the nut holding the yoke properly? TIA Dennis

Hop To