Sealing a log manifold to the head

Print Thread

Re: Sealing a log manifold to the head [Re: 67_Satellite] #911854 01/26/11 11:11 PM 01/26/11 11:11 PM
Joined: Jul 2008 Posts: 30,537 Florida STAYcation dOc ! The village idiot's idiot
dOc ! The village idiot's idiot Joined: Jul 2008 Posts: 30,537 Florida STAYcation	IF it is TRULY flat .. there should not be a problem. Some are saying and comparing manifolds that are 001 ...and 040 "out-of-wack". USING a gasket that will "insulate" the manifold from the head can be a major bummer SINCE the heat from the manifold(especially the flange area) ... bleeds-off TO the head.

Entire Thread
Subject	Posted By	Posted
Sealing a log manifold to the head	67_Satellite	01/24/11 12:34 AM
Re: Sealing a log manifold to the head	feets	01/24/11 09:59 PM
Re: Sealing a log manifold to the head	67_Satellite	01/25/11 02:25 AM
Re: Sealing a log manifold to the head	jyrki	01/25/11 07:29 AM
Re: Sealing a log manifold to the head	feets	01/25/11 03:14 PM
Re: Sealing a log manifold to the head	ahy	01/26/11 02:54 AM
Re: Sealing a log manifold to the head	dodgeboy11	01/26/11 06:03 AM
Re: Sealing a log manifold to the head	jyrki	01/26/11 07:36 AM
Re: Sealing a log manifold to the head	dOc !	01/26/11 09:04 AM
Re: Sealing a log manifold to the head	jyrki	01/26/11 01:29 PM
Re: Sealing a log manifold to the head	DJVCuda	01/26/11 02:43 PM
Re: Sealing a log manifold to the head	TRENDZ	01/27/11 12:33 AM
Re: Sealing a log manifold to the head	67_Satellite	01/27/11 02:58 AM
Re: Sealing a log manifold to the head	dOc !	01/27/11 03:11 AM
Re: Sealing a log manifold to the head	CW25	01/28/11 06:42 AM
Re: Sealing a log manifold to the head	67_Satellite	01/30/11 02:16 PM
Re: Sealing a log manifold to the head	HEMIFRED	01/31/11 03:06 AM

Hop To