This is just for fun and something I most likely wont
know unless you base it on the on track performance

Guess the HP and torque
What I have is a
340 stock block with 4 bolt caps at 4.070 bore
4" stroke crank turned down to chevy rod size (2.1")
6.125 Eagle H-beam rods
Diamond pistons with a 18cc dish and valve pockets
which will be either a 10.75 OR 11.02 compression
depending on which head gaskets
cam is a roundy round solid roller 260/270@50 .610/.610
lift on a 105 LSA installed at 105
TD rockers with push rod oiling 1.5/1.5... but I'm
checking my stash to see if I have any 1.6 intakes
W-5 ported heads.... 2.08 intakes, 1.6 exhaust both
are .343 stems peak flow is 310 cfm
M1 intake with 4500 adapter and a 1050 dom, match
ported to the heads
custom wet sump oil pan with scraper
1 7/8" headers

This is a pump gas engine
I think thats about it.... take a guess.... this is
going into my Rampage... this will be my Hot Rod
Drag week car and my street hot rod ... I expect it
to be at or a little less than 2800# with me