Quote:


Yes, the repair would be covered with vinyl but that is no excuse to do shoddy repair work.



I would think it depends on whether you intend to do the work, or if you're going to send it to a shop. Surely there's a reputable shop within a reasonable distance that could do it, but I doubt it would be cheap. If you intend to do it yourself, here's what I'd do (and I never have): take the windshield out. Measure the length and depth of what needs to be cut out. Measurements the angles for the breaks in the replacement sheet metal. Take that info to a local metal fabrication shop and have them cut and break a few straight pieces (at least one to practice on). To bend it, you'll have to cut notches at 1-2 inch intervals. Bend, hammer, weld, grind, fill, paint and you're done. Sound easy enough? Good luck!!!