Quote:

Looking to start collecting parts for my 360 build. I'm not looking to make a ton of hp but I want the car to get down the track. The only things I want out of the motor are: must run on pump gas, hyd. flat tappet cam only, Iron heads, no strokers and no $500 pistons. I want to make a reliable 400hp. I have 3.55 and a 5.38 geared center sections to work with and the trans will be built with all CRT parts...



Our 410 we did for CC made 485HP and 517 TQ with our RHS heads, no porting, pump gas and a hyd. cam.
So a 360 with same heads, intake, smaller 275HL cam and 9.8:1 should make 430-440HP with no other changes.
http://www.carcraft.com/techarticles/ccrp_1006_small_block_mopar_stroker_dyno_test/index.html

Brian Hafliger