Offset motor.....centered rear end pinion

Print Thread

Re: Offset motor.....centered rear end pinion [Re: Kern Dog] #680916 04/30/10 11:19 AM 04/30/10 11:19 AM
Joined: Sep 2005 Posts: 115 Manteca, CA DRJDVM OP member
DRJDVM OP member Joined: Sep 2005 Posts: 115 Manteca, CA	That page is very helpful.... What I'm talking about is the offset from side to side of the centerlines of the rearend yoke and the crankshaft.... in other words if you drew a straight line throught the crank and to the back of the car...and drew a straight line from the yoke to the front of the car....do they need to totally line up with each other in the horizontal plane...... So the answer is "No"... they just need to be parallel to each other....like the "Vertical Views" A and B on that linked page Which is what I have...so I should be good....

Entire Thread
Subject	Posted By	Posted
Offset motor.....centered rear end pinion	DRJDVM	04/26/10 10:18 PM
Re: Offset motor.....centered rear end pinion	Bill MeLater	04/27/10 03:32 AM
Re: Offset motor.....centered rear end pinion	Scott Carl	04/27/10 04:28 AM
Re: Offset motor.....centered rear end pinion	Kern Dog	04/27/10 04:32 AM
Re: Offset motor.....centered rear end pinion	DRJDVM	04/30/10 03:19 PM

Hop To