|
Re: 73-74 b body frame connectors
[Re: 71_deputy]
#659072
04/09/10 09:14 AM
04/09/10 09:14 AM
|
Joined: Oct 2003
Posts: 3,698 NE Oklahoma
Von
OP
master
|
OP
master
Joined: Oct 2003
Posts: 3,698
NE Oklahoma
|
Quote:
can be done- did my 73 RR- first thing is to make a cardboard template of the contors of the under side. find a friend with a plasma cutter- use 2 X 3 box tube steel.
after its cut out- grind to fine tune to under side and weld away!!!!
That connector looks very similar to the ones I fabbed for my 72. I started with MP bolt in connectors, and used a plasma, grinder, etc to make them weld in. They look very similar to yours.
But, Id say I spent 20 plus hours in fabbing those dang things. Not to mention I almost cut my finger off with the grinder.
But, in any case, thanks for the pics!! I may just tackle the job again.
72 RR, Pump gas 440, 452s, 3800 lbs, Corked, ET Radials,. 11.33@117.72.
Same car, bone stock 346s, 9.5 comp, baby solid. 12.24@110.
|
|
|
|
|
|