|
Re: 440 has no signs of life....will not fire at all
[Re: dssaa]
#647501
03/23/10 07:20 AM
03/23/10 07:20 AM
|
Joined: Jan 2003
Posts: 24,562 Brookeville, Md
Mr.Yuck
Not enough dumb comments...yet
|
Not enough dumb comments...yet
Joined: Jan 2003
Posts: 24,562
Brookeville, Md
|
Quote:
So here is where I am. I pulled all wires, put number 1 at TDC on compression stroke. Relaced it all up..primed carb with gas. I get some popping out the exhaust and through carb, some smoke drifting out of carb...but no signs of firing off? Please tell me I did not hose up the timing chain install! I lined up cam and timing mark. Used a standard NAPA brand timing set. I have good spark, plugs are good, wires are good..the shortblock I built had piston, rings, crank..basic shortblock already assembled. What gives? Compression feels strong. I will get a compression tester tomorrow to double check it. This is very frustrating.... gotta be something I am missing here..
I'm guessing you tried moving the distrib around some? sounds like you are getting fire and gas it's just not in "time" yet.
|
|
|
|
|
|