Quote:
Quote:
hi i had two customer cars this year with the same problem.i used a sazall it took three blades each bolt aprox time 30 min .i cut at the rubber with the lip as a guide with the arm at full up position. it wont seem like progress untill you pass the hardend outer edge of your bolt then it gets easier good luck
what he said , you have to cut it in the wheelwell , get carbide sawzall blades if possible .
un new englanders are very fermiliar with that procedure...heck were surprised if we dont have to cut them!
"Are you gonna bark all day lil doggy? Or are you gonna bite?"
05 ram 2500 ctd 74 gremlin x 360 65 mustang 347 70 coronet R/T 440 03 Mach 1
|