|
Re: 360 Enginie - 400 HP
[Re: autoxcuda]
#627146
03/02/10 01:31 AM
03/02/10 01:31 AM
|
Joined: Mar 2003
Posts: 571 Beaverton, OR, USA
Alikazam
super gas
|
super gas
Joined: Mar 2003
Posts: 571
Beaverton, OR, USA
|
Quote:
At what RPM does it idle down to? How is the idle, smooth or choppy?
Wondering how that cam would work in a 408 stroker.
She idles pretty smooth, just a slight lope when warmed up, but kinda choppy when she's cold... gives you the "drag car" feel haha. She Idles about 850 in gear, 900-950 out, but she'll go down as low as 750 if I wanted to let her warm up longer, lol, I just have no choke and I like it a little smoother so upped it just a tad.
Quote:
What do you have to run for fuel?
92 octane pump gas, even on the nitrous, I just add 8 degrees of timing retard for the nitrous shot (about 4 degrees more than recommended). I ran 10.07:1 compression with the iron heads on the same pump gas as well, though I did retard the overall timing a little more (32-33 total IIRC). She's runing about 17 initial with 35 total all in by 2800 rpm.
|
|
|
|
|
|