Flywheel and pressure plate hardware

Print Thread

Re: Flywheel and pressure plate hardware [Re: dustergirl340] #613354 02/14/10 04:30 PM 02/14/10 04:30 PM
Joined: Feb 2005 Posts: 28,312 Cincinnati, Ohio Challenger 1 Too Many Posts
Challenger 1 Too Many Posts Joined: Feb 2005 Posts: 28,312 Cincinnati, Ohio	If you use washers under the flywheel bolt's, make sure they are hardened. Another thing to check, is to make sure the flywheel bolt head thickness don't interfere with the disc or pressure plate. Grade 8 is strong enough imo.

Entire Thread
Subject	Posted By	Posted
Flywheel and pressure plate hardware	dustergirl340	02/14/10 06:44 PM
Re: Flywheel and pressure plate hardware	cloneguy	02/14/10 07:09 PM
Re: Flywheel and pressure plate hardware	Challenger 1	02/14/10 08:30 PM
Re: Flywheel and pressure plate hardware	chargersNW	02/14/10 08:39 PM
Re: Flywheel and pressure plate hardware	Challenger 1	02/14/10 08:44 PM
Re: Flywheel and pressure plate hardware	dustergirl340	02/14/10 10:06 PM
Re: Flywheel and pressure plate hardware	fourgearsavoy	02/14/10 10:12 PM
Re: Flywheel and pressure plate hardware	70duster340	02/14/10 10:36 PM
Re: Flywheel and pressure plate hardware	fourgearsavoy	02/15/10 12:50 AM
Re: Flywheel and pressure plate hardware	70duster340	02/15/10 01:19 AM
Re: Flywheel and pressure plate hardware	70duster340	02/15/10 01:48 AM
Re: Flywheel and pressure plate hardware	fourgearsavoy	02/15/10 02:49 AM
Re: Flywheel and pressure plate hardware	chargersNW	02/15/10 04:10 AM

Hop To