Flywheel and pressure plate hardware

Print Thread

Re: Flywheel and pressure plate hardware [Re: dustergirl340] #613353 02/14/10 03:09 PM 02/14/10 03:09 PM
Joined: Apr 2003 Posts: 1,054 Roswell, GA - near Atlanta cloneguy super street
cloneguy super street Joined: Apr 2003 Posts: 1,054 Roswell, GA - near Atlanta	I've seen people use grade 8 hardware for headbolts! I'm thinking it's OK but to be sure, look up what the strength is of the factory hardware in PSI and compare it to that of the grade 8. I'm sure the info is on the net somewhere under "fastener specs" or "fastener engineering" or something like that. Good luck. Martin, GA Quality Auto Restoration with Fair FIXED Pricing. Fast-N-Dangerous@comcast.net

Entire Thread
Subject	Posted By	Posted
Flywheel and pressure plate hardware	dustergirl340	02/14/10 06:44 PM
Re: Flywheel and pressure plate hardware	cloneguy	02/14/10 07:09 PM
Re: Flywheel and pressure plate hardware	Challenger 1	02/14/10 08:30 PM
Re: Flywheel and pressure plate hardware	chargersNW	02/14/10 08:39 PM
Re: Flywheel and pressure plate hardware	Challenger 1	02/14/10 08:44 PM
Re: Flywheel and pressure plate hardware	dustergirl340	02/14/10 10:06 PM
Re: Flywheel and pressure plate hardware	fourgearsavoy	02/14/10 10:12 PM
Re: Flywheel and pressure plate hardware	70duster340	02/14/10 10:36 PM
Re: Flywheel and pressure plate hardware	fourgearsavoy	02/15/10 12:50 AM
Re: Flywheel and pressure plate hardware	70duster340	02/15/10 01:19 AM
Re: Flywheel and pressure plate hardware	70duster340	02/15/10 01:48 AM
Re: Flywheel and pressure plate hardware	fourgearsavoy	02/15/10 02:49 AM
Re: Flywheel and pressure plate hardware	chargersNW	02/15/10 04:10 AM

Hop To