727 dipstick leaking-need dimensions

Print Thread

Re: 727 dipstick leaking-need dimensions [Re: 1_WILD_RT] #603343 02/04/10 01:28 AM 02/04/10 01:28 AM
Joined: Jun 2007 Posts: 318 Chicagoland stacks79 OP enthusiast
stacks79 OP enthusiast Joined: Jun 2007 Posts: 318 Chicagoland	Quote: Have a look at these aftermarket dipstick & tube assemblies.. Rather than use an O ring they use a formed rubber sleeve that eliminates any potential leakage... http://chucker54.stores.yahoo.net/trststdi.html interesting, anyone know if that rubber sleeve will fit a oem dipstick or only those aftermarket ones? I know the factory does not have that lip that looks like it stops the seal from creeping up, but if it fits the trans and you can bolt the dipstick in and bolt down...as long as the seal wont creep up... Thanks for the tip, will look into that one. John Last edited by stacks79; 02/04/10 01:41 AM.

Entire Thread
Subject	Posted By	Posted
727 dipstick leaking-need dimensions	stacks79	02/04/10 05:11 AM
Re: 727 dipstick leaking-need dimensions	BeEtLeJuIcE !	02/04/10 05:16 AM
Re: 727 dipstick leaking-need dimensions	stacks79	02/04/10 05:26 AM
Re: 727 dipstick leaking-need dimensions	1_WILD_RT	02/04/10 05:22 AM
Re: 727 dipstick leaking-need dimensions	stacks79	02/04/10 05:28 AM
Re: 727 dipstick leaking-need dimensions	1_WILD_RT	02/04/10 05:38 AM
Re: 727 dipstick leaking-need dimensions	stacks79	02/04/10 05:03 PM
Re: 727 dipstick leaking-need dimensions	John_Kunkel	02/04/10 11:01 PM
Re: 727 dipstick leaking-need dimensions	stacks79	02/05/10 04:29 AM

Hop To