what do I use for break in oil...

Print Thread

Re: what do I use for break in oil... [Re: 70AARcuda] #602611 02/04/10 11:38 AM 02/04/10 11:38 AM
Joined: Sep 2004 Posts: 6,906 IL, Aurora A ademon master
ademon master A Joined: Sep 2004 Posts: 6,906 IL, Aurora	This is the right VR1 for break in, and everyday use with high spring psi, not sure how many PPM of zinc it has but should be over the safe minimum of 1300ppm. http://www.valvoline.com/products/consumer-products/motor-oil/racing-motor-oil/9

Entire Thread
Subject	Posted By	Posted
what do I use for break in oil...	JonGottaDemonDad	02/03/10 09:14 PM
Re: what do I use for break in oil...	AndyF	02/03/10 09:20 PM
Re: what do I use for break in oil...	TMBOOTS	02/03/10 09:27 PM
Re: what do I use for break in oil...	JonGottaDemonDad	02/03/10 09:37 PM
Re: what do I use for break in oil...	71scamp440	02/04/10 04:42 PM
Re: what do I use for break in oil...	65cuda	02/04/10 05:20 PM
Re: what do I use for break in oil...	Dabee	02/03/10 10:00 PM
Re: what do I use for break in oil...	newem	02/03/10 10:08 PM
Re: what do I use for break in oil...	70AARcuda	02/03/10 10:30 PM
Re: what do I use for break in oil...	JonGottaDemonDad	02/03/10 10:52 PM
Re: what do I use for break in oil...	torkrules	02/03/10 11:23 PM
Re: what do I use for break in oil...	Von	02/03/10 11:23 PM
Re: what do I use for break in oil...	RapidRobert	02/03/10 11:38 PM
Re: what do I use for break in oil...	Von	02/04/10 03:24 AM
Re: what do I use for break in oil...	RapidRobert	02/04/10 03:41 AM
Re: what do I use for break in oil...	JonGottaDemonDad	02/04/10 04:01 AM
Re: what do I use for break in oil...	Moparzrule	02/04/10 06:08 AM
Re: what do I use for break in oil...	Moparzrule	02/04/10 06:11 AM
Re: what do I use for break in oil...	v269	02/04/10 01:56 PM
Re: what do I use for break in oil...	70AARcuda	02/04/10 03:28 PM
Re: what do I use for break in oil...	ademon	02/04/10 03:38 PM

Hop To