5.9 Magnum Hydraulic Roller Cam Regrind

Print Thread

Re: 5.9 Magnum Hydraulic Roller Cam Regrind [Re: patrick] #594684 01/31/10 03:01 AM 01/31/10 03:01 AM
Joined: Oct 2003 Posts: 1,371 Costa Mesa, CA C chache876 OP pro stock
chache876 OP pro stock C Joined: Oct 2003 Posts: 1,371 Costa Mesa, CA	Well I decided on getting the cam. Its a 231/234 .487/.497 106 LSA I may end up just going with the Hughes 1110 springs as I'm not too sure what kind of RPM the 3100 springs are good to. Whats the deal with the 1110 springs? Can I use the 2.2/2.5l retainers with these?

Entire Thread
Subject	Posted By	Posted
5.9 Magnum Hydraulic Roller Cam Regrind	chache876	01/26/10 09:10 PM
Re: 5.9 Magnum Hydraulic Roller Cam Regrind	POS Dakota	01/26/10 09:54 PM
Re: 5.9 Magnum Hydraulic Roller Cam Regrind	mcmopars	01/26/10 10:11 PM
Re: 5.9 Magnum Hydraulic Roller Cam Regrind	Wedgeman	01/26/10 10:48 PM
Re: 5.9 Magnum Hydraulic Roller Cam Regrind	VITC_GTX	01/26/10 11:04 PM
Re: 5.9 Magnum Hydraulic Roller Cam Regrind	HotRodDave	01/26/10 11:44 PM
Re: 5.9 Magnum Hydraulic Roller Cam Regrind	chache876	01/27/10 12:01 AM
Re: 5.9 Magnum Hydraulic Roller Cam Regrind	scratchnfotraction	01/27/10 12:23 AM
Re: 5.9 Magnum Hydraulic Roller Cam Regrind	Wedgeman	01/27/10 12:26 AM
Re: 5.9 Magnum Hydraulic Roller Cam Regrind	scratchnfotraction	01/27/10 12:47 AM
Re: 5.9 Magnum Hydraulic Roller Cam Regrind	chache876	01/27/10 02:00 AM
Re: 5.9 Magnum Hydraulic Roller Cam Regrind	scratchnfotraction	01/27/10 02:05 AM
Re: 5.9 Magnum Hydraulic Roller Cam Regrind	joedust451	01/27/10 03:08 AM
Re: 5.9 Magnum Hydraulic Roller Cam Regrind	patrick	01/27/10 01:16 PM
Re: 5.9 Magnum Hydraulic Roller Cam Regrind	scratchnfotraction	01/27/10 01:19 PM
Re: 5.9 Magnum Hydraulic Roller Cam Regrind	chache876	01/28/10 10:14 PM
Re: 5.9 Magnum Hydraulic Roller Cam Regrind	patrick	01/29/10 01:23 PM
Re: 5.9 Magnum Hydraulic Roller Cam Regrind	chache876	01/31/10 07:01 AM
Re: 5.9 Magnum Hydraulic Roller Cam Regrind	patrick	01/31/10 04:33 PM
Re: 5.9 Magnum Hydraulic Roller Cam Regrind	chache876	02/02/10 11:13 AM
Re: 5.9 Magnum Hydraulic Roller Cam Regrind	patrick	01/27/10 01:14 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To