drag only motor car weights 2961 w/driver t-brake 4.88 gear 32x14x15 M/T thats the only specs I have I launch at 48-5000 shift at 6500 the cam that is in the motor is way small need something bigger.The cam thats in the motor is ok in the 1/8 but stops pulling about 1000' in the 1/4 and I know I am leaving a lot on the table.


70 duster full chassis super pro 416 CNC Indybrock heads 727 w/brake

best so far 1.212 60 6.219 in 1/8 at 110.88 9.768 at 137.81 1/4