Rolling a bead into copper pipe

Print Thread

Re: Rolling a bead into copper pipe [Re: PhillyRag] #581407 01/14/10 08:57 AM 01/14/10 08:57 AM
Joined: Sep 2004 Posts: 1,226 Cookeville Chilort OP Will Work For Mopars
Chilort OP Will Work For Mopars Joined: Sep 2004 Posts: 1,226 Cookeville	Quote: Ferrule is what I had in mind. The copper ring would be great if OD of tubing isn't an aval. ferrule size. I considered going this route but at the two hardware stores I went into (big box type) I couldn't find unions that had free ferrules. All of the ferrules were captured in the compression nut. I love Ghettobeader.

Entire Thread
Subject	Posted By	Posted
Rolling a bead into copper pipe	Chilort	01/13/10 10:55 PM
Re: Rolling a bead into copper pipe	OzHemi	01/13/10 11:13 PM
Re: Rolling a bead into copper pipe	RapidRobert	01/13/10 11:59 PM
Re: Rolling a bead into copper pipe	Chilort	01/14/10 12:23 AM
Re: Rolling a bead into copper pipe	RapidRobert	01/14/10 12:34 AM
Re: Rolling a bead into copper pipe	Commando1	01/14/10 02:53 AM
Re: Rolling a bead into copper pipe	John_Kunkel	01/14/10 12:31 AM
Re: Rolling a bead into copper pipe	Chilort	01/14/10 12:42 AM
Re: Rolling a bead into copper pipe	Chilort	01/14/10 12:48 AM
Re: Rolling a bead into copper pipe	OzHemi	01/14/10 01:09 AM
Re: Rolling a bead into copper pipe	Stanton	01/14/10 01:17 AM
Re: Rolling a bead into copper pipe	DAYCLONA	01/14/10 01:37 AM
Re: Rolling a bead into copper pipe	Chilort	01/14/10 01:48 AM
Re: Rolling a bead into copper pipe	wedgg440	01/14/10 02:02 AM
Re: Rolling a bead into copper pipe	scratchnfotraction	01/14/10 02:16 AM
Re: Rolling a bead into copper pipe	Chilort	01/14/10 03:22 AM
Re: Rolling a bead into copper pipe	Stanton	01/14/10 04:58 AM
Re: Rolling a bead into copper pipe	PhillyRag	01/14/10 07:48 AM
Re: Rolling a bead into copper pipe	BigBlockMopar	01/14/10 10:19 AM
Re: Rolling a bead into copper pipe	RapidRobert	01/14/10 02:09 PM
Re: Rolling a bead into copper pipe	Chilort	01/14/10 12:57 PM

Hop To