How to tell if engine was broken in properly?

Print Thread

Re: How to tell if engine was broken in properly? [Re: MNobody] #576631 01/15/10 06:05 PM 01/15/10 06:05 PM
Joined: Oct 2004 Posts: 480 Kentucky, USA D derekeh OP mopar
derekeh OP mopar D Joined: Oct 2004 Posts: 480 Kentucky, USA	Compression tests showed about 135-145 psi per cylinder. Ive tried 3 carbs that were running fine on other engines and could not tell any difference. Should I try degreeing the cam and see if the problem lies in that?

Entire Thread
Subject	Posted By	Posted
How to tell if engine was broken in properly?	derekeh	01/08/10 07:06 PM
Re: How to tell if engine was broken in properly?	aarcuda	01/08/10 07:13 PM
Re: How to tell if engine was broken in properly?	MNobody	01/08/10 07:46 PM
Re: How to tell if engine was broken in properly?	Lefty	01/08/10 08:05 PM
Re: How to tell if engine was broken in properly?	RapidRobert	01/08/10 08:23 PM
Re: How to tell if engine was broken in properly?	CYACOP	01/08/10 09:00 PM
Re: How to tell if engine was broken in properly?	broncobra	01/08/10 09:18 PM
Re: How to tell if engine was broken in properly?	derekeh	01/08/10 10:50 PM
Re: How to tell if engine was broken in properly?	aarcuda	01/08/10 11:04 PM
Re: How to tell if engine was broken in properly?	derekeh	01/09/10 12:41 AM
Re: How to tell if engine was broken in properly?	jbc426	01/09/10 01:53 AM
Re: How to tell if engine was broken in properly?	MNobody	01/09/10 06:34 AM
Re: How to tell if engine was broken in properly?	derekeh	01/15/10 10:05 PM
Re: How to tell if engine was broken in properly?	aarcuda	01/16/10 03:49 AM
Re: How to tell if engine was broken in properly?	derekeh	01/16/10 06:17 PM
Re: How to tell if engine was broken in properly?	derekeh	01/19/10 02:44 AM
Re: How to tell if engine was broken in properly?	Lew	01/19/10 12:51 PM
Re: How to tell if engine was broken in properly?	derekeh	01/19/10 03:03 PM
Re: How to tell if engine was broken in properly?	RapidRobert	01/19/10 03:11 PM
Re: How to tell if engine was broken in properly?	bobby66	01/19/10 03:15 PM
Re: How to tell if engine was broken in properly?	Sub95	01/16/10 08:09 AM
Re: How to tell if engine was broken in properly?	six-barrel	01/08/10 11:09 PM
Re: How to tell if engine was broken in properly?	zzyzxpat	01/09/10 01:12 AM
Re: How to tell if engine was broken in properly?	ireland383	01/09/10 01:19 AM
Re: How to tell if engine was broken in properly?	aarcuda	01/09/10 01:47 AM
Re: How to tell if engine was broken in properly?	JonC	01/16/10 03:08 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To