How to tell if engine was broken in properly?

Print Thread

Re: How to tell if engine was broken in properly? [Re: zzyzxpat] #576627 01/08/10 09:19 PM 01/08/10 09:19 PM
Joined: Nov 2004 Posts: 843 Suffolk,VA I ireland383 super stock
ireland383 super stock I Joined: Nov 2004 Posts: 843 Suffolk,VA	1.Put a vacuum gauge on it. 2.Clean out carb real good. 3.Check to make sure intake is not sucking oil.4.Do a compression test Good luck! Last edited by ireland383; 01/08/10 09:20 PM.

Entire Thread
Subject	Posted By	Posted
How to tell if engine was broken in properly?	derekeh	01/08/10 07:06 PM
Re: How to tell if engine was broken in properly?	aarcuda	01/08/10 07:13 PM
Re: How to tell if engine was broken in properly?	MNobody	01/08/10 07:46 PM
Re: How to tell if engine was broken in properly?	Lefty	01/08/10 08:05 PM
Re: How to tell if engine was broken in properly?	RapidRobert	01/08/10 08:23 PM
Re: How to tell if engine was broken in properly?	CYACOP	01/08/10 09:00 PM
Re: How to tell if engine was broken in properly?	broncobra	01/08/10 09:18 PM
Re: How to tell if engine was broken in properly?	derekeh	01/08/10 10:50 PM
Re: How to tell if engine was broken in properly?	aarcuda	01/08/10 11:04 PM
Re: How to tell if engine was broken in properly?	derekeh	01/09/10 12:41 AM
Re: How to tell if engine was broken in properly?	jbc426	01/09/10 01:53 AM
Re: How to tell if engine was broken in properly?	MNobody	01/09/10 06:34 AM
Re: How to tell if engine was broken in properly?	derekeh	01/15/10 10:05 PM
Re: How to tell if engine was broken in properly?	aarcuda	01/16/10 03:49 AM
Re: How to tell if engine was broken in properly?	derekeh	01/16/10 06:17 PM
Re: How to tell if engine was broken in properly?	derekeh	01/19/10 02:44 AM
Re: How to tell if engine was broken in properly?	Lew	01/19/10 12:51 PM
Re: How to tell if engine was broken in properly?	derekeh	01/19/10 03:03 PM
Re: How to tell if engine was broken in properly?	RapidRobert	01/19/10 03:11 PM
Re: How to tell if engine was broken in properly?	bobby66	01/19/10 03:15 PM
Re: How to tell if engine was broken in properly?	Sub95	01/16/10 08:09 AM
Re: How to tell if engine was broken in properly?	six-barrel	01/08/10 11:09 PM
Re: How to tell if engine was broken in properly?	zzyzxpat	01/09/10 01:12 AM
Re: How to tell if engine was broken in properly?	ireland383	01/09/10 01:19 AM
Re: How to tell if engine was broken in properly?	aarcuda	01/09/10 01:47 AM
Re: How to tell if engine was broken in properly?	JonC	01/16/10 03:08 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To