Quote:

---

My cam lash on my bullet cam is .020 on both sides... and yes it all aluminum.... so cold settings at .005 on both sides cause I thought you didnt wanna go any tighter than that... anyways after setting cold lash at .005 and then check lash after engine is hot and then youll know what to actual set cold lash at to match cam makers lash spec hot... right

---

That may get you close,we would rather set them hot when ever possible..005 is to get you fired up never set them any closer.Cams with larger lash can be set between .005 and .010.cold.We like the engine to be aprox,180 degrees for lash settings.