Quote:

i have harland sharp that will work but i need to change the intake rocker to the correct offset and HS sells those.sorry you had problems with the springs,valves...



Back in the 90s board member MRMOPAR pretty much ran the combo you are looking at. IIRC it was a .040 stock stroke 440 with Pro Gram Main Caps, a Callies Crank, Ferea Rods, Crower 280R roller with a GMC 6-71 on a Dyers intake with a pair of 850s from the supercharger store (?) and the B1BS heads. I don't believe that the heads were ported at all - just OOTB, and I am not convinced that they did all that much over the iron heads they replaced. In other words, I don't think I would bother without porting them.

I believe he still has a set of the special offset B1BS Harland Sharp rockers that he would be willing to unload. Try sending him a PM.

Last edited by Bill_T; 01/14/10 12:45 PM.