I'm interested in upgrading my pushrods. So I got on the bag to check this out. Most of these pushrods for sale are made by trend. Great pushrods but can't be shortened. They are chrome moly and one peice. Every brand of lifter requires a little difference in pushrod length. I can't remember specifically but I think just over 8" with a 60 mm cam Morrel lifters 9" deck and 1.75 jesels on CFE W8's. My engine will not clear a 7/16 by the port on the intake side. Currently run 3/8 but this is going to change. Single taper on the intake and straight on the exhaust I beleive. Will have to look.

Leon


Career best 8.02 @ 169 at 3050# and 10" tires small block power.