changing exhaust manifold

Print Thread

changing exhaust manifold #484021 09/30/09 09:17 AM 09/30/09 09:17 AM
Joined: Jan 2003 Posts: 1,090 Slidell, la. 1BAD383 OP 08 SRT Challenger
1BAD383 OP 08 SRT Challenger Joined: Jan 2003 Posts: 1,090 Slidell, la.	The driver side exhaust manifold cracked. Got another manifold and gaskets. The front stud stayed in and removed the nut. The next 3 were bolts, which came out. The next was a stud that came out. The last one was the long special bolt that came out. Replaced the 3 old bolts with stainless steel bolts and lock washers. Replaced the stud that came out with a new steel stud and reused the long special bolt. Used ultra copper high temp RTV silicone gasket maker on the bolts and the stud that was replaced. Cleaned all the treads. I have a leak. Did I use the wrong silicone.

Entire Thread
Subject	Posted By	Posted
changing exhaust manifold	1BAD383	09/30/09 01:17 PM
Re: changing exhaust manifold	johnedod	09/30/09 01:31 PM
Re: changing exhaust manifold	DJVCuda	09/30/09 01:39 PM

Hop To