Here is some technical....

Engine is a 572 Keith Black
B1 original heads ported by Koffel 410cfm/300cfm
Venolia pistons gasported 16/1 compression
Steel Manley rods
Roller cam .800" lift
Keith Black distributor gear drive
Koffel Sheetmetal intake w/2 Gary Stynet Dominators C16 fuel
Magnafuel Prostar 500 fuel pump
1028hp / 7200 rpm no spray
Moroso 4 vane vacuum pump
Home made 2 1/2" stainless headers

Transmission :
Lenco drive 3 speed 1.98 / 1.41 / 1
PTC bolt together 9.5" converter megashaft 1.25"

Rear : 9" w/ 4.30/1 ratio 35 splines axles
I have to swap to a 4.7/1 now to go in the 7"
Tires : Goodyear 33*16.5*15

Computer : Racepak V300SD w/$$$$$ of sensors...

'70 Cuda with a 572 Keith Black / B1 heads with a sheetmetal intake (2 dominators) Lencodrive 3 speed trans. 2350 lbs with me Run 8.04" / 168 mph 1.11" 60 ft Fastest Mopar at the Euro Mopar Nats website : http://vantastic-racing.com/