Quote:

---

Quote:

---

Heat shields 3 each
Starter splash shield 4 ?
K frame shields 2 each
Rear axle rebound bumpers 2 each

I count 16

---

2 on each on front splash shield or ? 4
Axle rebound bumpers take captive washer 1/4-20 bolts (4)
Mine is 4 spd no spash shield.
Rear heat shields should take 1 each on front due to rear
portion of the heat shield attached to the tip hangers ?

So I would think total of 6 for 4 spd car and 10 for auto car.
Bill, Get ready to take an order.



logan426

---

I don't agree....The rebound bumbers never used a 1/4 20 bolt, there would have to be nuts welded inside the frame rail which there isn't.
The muffler heat shield require 3 each AND the rear muffler hanger....I guess you could omit the two that go into each frame rail if you're into rattles

Most 72-74 cars that I've restored used the screws on the K frame shields, but recently I've been finding pop rivits on the 70's I've been working on. I believe 71 would be the change over year.

I'm sticking with my first count.