Quote:

Quote:


Anyone else with tight fan clearence?
Will a short clutch fan fit?



The problem with the aluminum rads is that they are thicker than the brass ones. I used a mancini rad that looks very similar too yours. I bought their shroud but it needed rework. I used their 22" rad as at the time I didn't know about the aftermarket yokes you can buy. It still cools fine.

I used a 6 blade fan on a jaguar clutch (it's the only one that would fit), however, it did not cool very good at idle. I replaced it with a 6 blade solid fan with a 1"spacer which cools well at idle.



Did you use a Mopar solid fan or aftermarket? The owner of the car will probably idle around cruise night as much as anything, so I guess from what you are saying the Jag clutch is out?
BTW, this is a 26" 1 1/4" tube/ Do you think that there would still be a problem with a clutch fan?
Also this is a mild 472 with AC.

Thanks,
Mark


1996 Ram 1500 Sport
1968 road runner
1952 Sears Allstate licensed, pump gas, Hemi 5.98 @ 115.73 1.33 60 ft. The best is yet to come. Painless Performance / Street RODDER magazine Top 100 for 2019