At what ET do you need a roll bar in the 1/8th??

Print Thread

Re: At what ET do you need a roll bar in the 1/8th?? [Re: sshemi] #441708 08/18/09 12:30 PM 08/18/09 12:30 PM
Joined: Jan 2003 Posts: 4,247 Newfoundland C codfish OP master
codfish OP master C Joined: Jan 2003 Posts: 4,247 Newfoundland	Quote: havent they changed it to faster than 11.00? That would be around 7.0 in the 1/8 Wasn't it just three years ago or so that it was changed from 11.99 to 11.49? If it's been changed to 11 or quicker, it musta been a REAL recent change. codfish

Entire Thread
Subject	Posted By	Posted
At what ET do you need a roll bar in the 1/8th??	codfish	08/18/09 03:35 AM
Re: At what ET do you need a roll bar in the 1/8th??	justinp61	08/18/09 03:46 AM
Re: At what ET do you need a roll bar in the 1/8th??	codfish	08/18/09 01:58 PM
Re: At what ET do you need a roll bar in the 1/8th??	70dusterjohn	08/18/09 02:57 PM
Re: At what ET do you need a roll bar in the 1/8th??	sshemi	08/18/09 03:17 PM
Re: At what ET do you need a roll bar in the 1/8th??	70dusterjohn	08/18/09 03:22 PM
Re: At what ET do you need a roll bar in the 1/8th??	codfish	08/18/09 04:30 PM
Re: At what ET do you need a roll bar in the 1/8th??	Irun5snd8th	08/18/09 04:41 PM
Re: At what ET do you need a roll bar in the 1/8th??	codfish	08/18/09 04:44 PM
Re: At what ET do you need a roll bar in the 1/8th??	Valiant_Showoff	08/18/09 04:55 PM
Re: At what ET do you need a roll bar in the 1/8th??	383man	08/18/09 05:01 PM
Re: At what ET do you need a roll bar in the 1/8th??	codfish	08/18/09 05:12 PM
Re: At what ET do you need a roll bar in the 1/8th??	sshemi	08/18/09 05:20 PM
Re: At what ET do you need a roll bar in the 1/8th??	Irun5snd8th	08/18/09 06:29 PM
Re: At what ET do you need a roll bar in the 1/8th??	Cuda_Mike	08/18/09 06:35 PM
Re: At what ET do you need a roll bar in the 1/8th??	sshemi	08/18/09 06:52 PM
Re: At what ET do you need a roll bar in the 1/8th??	ProStDodge	08/18/09 07:10 PM

Hop To