Welding brace on 8 3/4, without a jig

Print Thread

Re: Welding brace on 8 3/4, without a jig [Re: MR_P_BODY] #428129 08/07/09 09:08 AM 08/07/09 09:08 AM
Joined: Apr 2003 Posts: 1,613 Burlington,Ont. 77DragracerR/T top fuel
77DragracerR/T top fuel Joined: Apr 2003 Posts: 1,613 Burlington,Ont.	I welded mine assembled in the car and when i changed the axles everything slid in & out fine.That's all that matters for me.Took my time welding and didn't allow any heat to build up.Maybe I'm just lucky? Now transmissions not so lucky 77 Aspen R/T 60'@1.41 10.76 @ 123.26 http://www.youtube.com/watch?v=Eya3Ue8KoZk

Entire Thread
Subject	Posted By	Posted
Welding brace on 8 3/4, without a jig	Von	08/04/09 01:49 PM
Re: Welding brace on 8 3/4, without a jig	scratchnfotraction	08/04/09 02:16 PM
Re: Welding brace on 8 3/4, without a jig	mr2performance	08/04/09 04:43 PM
Re: Welding brace on 8 3/4, without a jig	Moparnut426	08/04/09 04:50 PM
Re: Welding brace on 8 3/4, without a jig	Quicktree	08/04/09 07:51 PM
Re: Welding brace on 8 3/4, without a jig	jcc	08/06/09 02:04 AM
Re: Welding brace on 8 3/4, without a jig	boomer	08/07/09 12:34 AM
Re: Welding brace on 8 3/4, without a jig	LA360	08/07/09 02:42 AM
Re: Welding brace on 8 3/4, without a jig	Stanton	08/04/09 06:25 PM
Re: Welding brace on 8 3/4, without a jig	MR_P_BODY	08/07/09 02:58 AM
Re: Welding brace on 8 3/4, without a jig	Thumperdart	08/07/09 04:32 AM
Re: Welding brace on 8 3/4, without a jig	MR_P_BODY	08/07/09 12:55 PM
Re: Welding brace on 8 3/4, without a jig	77DragracerR/T	08/07/09 01:08 PM
Re: Welding brace on 8 3/4, without a jig	Cab_Burge	08/07/09 04:04 PM
Re: Welding brace on 8 3/4, without a jig	d7cook	08/07/09 04:53 PM

Hop To