Timing mark - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Timing mark

Print Thread

Timing mark #380142 07/19/09 02:56 PM 07/19/09 02:56 PM
Joined: Apr 2005 Posts: 274 Valrico FL 1 1toolguy OP enthusiast
1toolguy OP enthusiast 1 Joined: Apr 2005 Posts: 274 Valrico FL	Just wanted to make sure I'm doing this right. Using a piston stop and some math I have determined that my balancers TDC mark is off 5-degrees ATDC. So I should use the 5-degree BTDC mark on my timing cover as "0" correct?

Entire Thread
Subject	Posted By	Posted
Timing mark	1toolguy	07/19/09 06:56 PM
Re: Timing mark	RapidRobert	07/19/09 07:16 PM
Re: Timing mark	1toolguy	07/19/09 07:18 PM
Re: Timing mark	Anonymous	07/19/09 08:32 PM
Re: Timing mark	RapidRobert	07/19/09 08:53 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1