clay mold results / quench question

Print Thread

Re: clay mold results / quench question [Re: Bill MeLater] #344354 06/12/09 08:48 AM 06/12/09 08:48 AM
Joined: Nov 2008 Posts: 671 Wisconsin USA B Bill MeLater mopar
Bill MeLater mopar B Joined: Nov 2008 Posts: 671 Wisconsin USA	I'm running 10.3 to 1 w/iron heads.Had .016 dif in deck heights. Runs great on the local BP 93...NO ping, pulls like mad to 7k, no problem. We're at the same elevation, what's ACTUAL intake close on your cam choice?

Entire Thread
Subject	Posted By	Posted
clay mold results / quench question	newbee69	06/12/09 12:48 AM
Re: clay mold results / quench question	Supercuda	06/12/09 12:51 AM
Re: clay mold results / quench question	newbee69	06/12/09 12:57 AM
Re: clay mold results / quench question	Supercuda	06/12/09 01:09 AM
Re: clay mold results / quench question	patrick	06/12/09 01:29 AM
Re: clay mold results / quench question	newbee69	06/12/09 01:33 AM
Re: clay mold results / quench question	RapidRobert	06/12/09 01:40 AM
Re: clay mold results / quench question	1/2 as nutT !	06/12/09 01:40 AM
Re: clay mold results / quench question	newbee69	06/12/09 01:59 AM
Re: clay mold results / quench question	1/2 as nutT !	06/12/09 02:04 AM
Re: clay mold results / quench question	Crizila	06/12/09 02:33 AM
Re: clay mold results / quench question	Stanton	06/12/09 02:42 AM
Re: clay mold results / quench question	newbee69	06/12/09 02:55 AM
Re: clay mold results / quench question	HotRodDave	06/12/09 05:06 AM
Re: clay mold results / quench question	Bill MeLater	06/12/09 12:42 PM
Re: clay mold results / quench question	Bill MeLater	06/12/09 12:48 PM
Re: clay mold results / quench question	justinp61	06/12/09 02:07 AM
Re: clay mold results / quench question	JohnRR	06/12/09 01:01 PM
Re: clay mold results / quench question	moper	06/12/09 04:10 PM
Re: clay mold results / quench question	newbee69	06/13/09 01:19 AM
Re: clay mold results / quench question	383man	06/13/09 02:45 AM
Re: clay mold results / quench question	RapidRobert	06/13/09 04:50 AM
Re: clay mold results / quench question	JohnRR	06/13/09 11:22 AM
Re: clay mold results / quench question	newbee69	06/13/09 05:35 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To