Crank ccw design, and balancing article from Engine Builder

Print Thread

Re: Crank ccw design, and balancing article from Engine Builder [Re: 440Jim] #3225006 04/04/24 12:41 PM 04/04/24 12:41 PM
Joined: Aug 2003 Posts: 43,303 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,303 Bend,OR USA	I bought a old used forged steel KB Top Fuel fully counterweighted crank that had 4 cracks in it and sent it to David at marine Crankshaft CO in SO CA to fix it I took it to Summers Machine in Battleground, WA last year along with Scat H beam steel rods Mopar size rod journals rated at 1000+HP, JE pistons and it ended up costing me a tiny bit under $1800.00 for the balancing, they said it took a bunch of heavy metal to balance it I'll buy new stroker cranks from now on Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Entire Thread
Subject	Posted By	Posted
Crank ccw design, and balancing article from Engine Builder	gregsdart	04/02/24 01:49 PM
Re: Crank ccw design, and balancing article from Engine Builder	Al_Alguire	04/02/24 04:27 PM
Re: Crank ccw design, and balancing article from Engine Builder	gregsdart	04/02/24 06:17 PM
Re: Crank ccw design, and balancing article from Engine Builder	Al_Alguire	04/03/24 03:11 PM
Re: Crank ccw design, and balancing article from Engine Builder	mopar873	04/03/24 05:31 PM
Re: Crank ccw design, and balancing article from Engine Builder	gregsdart	04/03/24 06:21 PM
Re: Crank ccw design, and balancing article from Engine Builder	440Jim	04/04/24 04:29 PM
Re: Crank ccw design, and balancing article from Engine Builder	Cab_Burge	04/04/24 04:41 PM

Hop To