Originally Posted by AndyF
It does have the CNC 345 heads on it and the cam specs on the old build sheet are 282/290 R113. I'm not sure if that is an old Indy cam or not. Customer's carb is a Holley 80672 1050 three circuit. It was way too rich so we swapped on the dyno room 1050.

282/290 on 113 LSA sounds good to me. With at least 13.0 CR, it should make good power 840-875
Close to Indy cam specs, but not a match.

What size dia & length are the dyno headers. That will affect things too.

Indy_Cams_Rollers.JPG