PC-7 epoxy is what Eastwood sells in their kits.
You can get it at the hardware store much cheaper.
I did mine about 10 years ago and despite the extreme temps here in Kansas, it's holding up nicely.
I wish I had before pics because it was REALLY bad and missing large pieces. I used an angle grinder and dremel tool to get to clean metal and plastic.
One key to painting is bolt it to the engine stand so you can rotate it!
'63 Dodge 330
11.19 @ 121 mph
Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs.
9.92 @ 135mph with a 350 shot of nitrous and 93 octane pump. 1.43 60 ft. 3,750 lbs.
| 
