Narrow Rod Bearings not 'narrow' enough

Print Thread

Re: Narrow Rod Bearings not 'narrow' enough [Re: Craig J] #3210231 02/03/24 11:43 AM 02/03/24 11:43 AM
Joined: Dec 2006 Posts: 2,123 Byron, NY W.I.N. Racing top fuel
W.I.N. Racing top fuel Joined: Dec 2006 Posts: 2,123 Byron, NY	I use Clevite V bearings...Here's the width changes pics to a BN set getting ready to go in now...notice Tang location. These also Have Dowel holes but can be used with or without. Last edited by W.I.N. Racing; 02/03/24 11:54 AM. '01 P1500, Blown/Inj BAE,/Veney ,Bruno/CS2,Dana 60 '01 Dodge 3500 S Cummins Auto, Fresh air kit, 4" Exhaust, '05 Dodge Magnum R/T - Too Much to list '60 Willys CJ5 '01 International LPX - Project,DT466, Allison '64 Plymouth Valiant, Inj 528 Hemi, 2spd

Entire Thread
Subject	Posted By	Posted
Narrow Rod Bearings not 'narrow' enough	Craig J	02/02/24 11:51 PM
Re: Narrow Rod Bearings not 'narrow' enough	B1duster	02/03/24 12:18 AM
Re: Narrow Rod Bearings not 'narrow' enough	Craig J	02/03/24 12:23 AM
Re: Narrow Rod Bearings not 'narrow' enough	B1duster	02/03/24 12:32 AM
Re: Narrow Rod Bearings not 'narrow' enough	Craig J	02/03/24 12:35 AM
Re: Narrow Rod Bearings not 'narrow' enough	B1duster	02/03/24 12:43 AM
Re: Narrow Rod Bearings not 'narrow' enough	Craig J	02/03/24 12:57 AM
Re: Narrow Rod Bearings not 'narrow' enough	B1duster	02/03/24 03:21 PM
Re: Narrow Rod Bearings not 'narrow' enough	Cab_Burge	02/03/24 06:58 PM
Re: Narrow Rod Bearings not 'narrow' enough	rickseeman	02/03/24 08:44 PM
Re: Narrow Rod Bearings not 'narrow' enough	BSB67	02/03/24 03:02 AM
Re: Narrow Rod Bearings not 'narrow' enough	Jeremiah	02/03/24 06:39 AM
Re: Narrow Rod Bearings not 'narrow' enough	fbs63	02/03/24 01:37 PM
Re: Narrow Rod Bearings not 'narrow' enough	Craig J	02/03/24 03:44 PM
Re: Narrow Rod Bearings not 'narrow' enough	W.I.N. Racing	02/03/24 03:43 PM
Re: Narrow Rod Bearings not 'narrow' enough	B1MAXX	02/03/24 05:17 PM
Re: Narrow Rod Bearings not 'narrow' enough	fast68plymouth	02/03/24 05:27 PM
Re: Narrow Rod Bearings not 'narrow' enough	Craig J	02/03/24 06:43 PM
Re: Narrow Rod Bearings not 'narrow' enough	B1MAXX	02/04/24 02:52 PM
Re: Narrow Rod Bearings not 'narrow' enough	Craig J	02/04/24 03:12 PM

Hop To