The door originally had body shims in it and the passenger has washers. I will probably be using shims in the end, I might get the doors aligned without shims but maybe not.
Washers work, but I want something that has both a more finished look and gets the door adjusted to where it needs to be.
I need a piece of metal that's around .065 thick.
Thanks As poorboy suggested: I might suggest making a cardboard template to fit where the shim is needed, then transfer the template dimensions to the metal. Don't forget to make sure the mounting bolts are gong to be long enough.  Easily fabricated   Yeah, I've decided that a piece of 16 gauge will work just fine.
1972 Cuda 340 4 speed, 2001 Ram CTD 4x4 6 speed, 1970 Duster 408 4 speed, 1996 Ram 5.9 2x4 auto, 1965 Coronet 500
| 
