Got the engine on the run stand and it did take 3-4 seconds for it to build pressure, so I have decided to go ahead and install a check valve. Did a quick fit up tonight and wanted some feedback on the routing-just curious about the two 90 degree bends.
'75 Plymouth Duster
Phase I 451 906/590/2-660 10.75/126
Phase II 451 Stage VI/590/1050 9.82/135
Phase III 383 906/Victor-Pump gas 11.30/119
"For by grace you have been saved through faith. And this is not your own doing; it is the gift of God,"
| 
