360 in a 318 833od - Moparts Forums

Register Log In Moparts Forums Sandy's Truck Shop 360 in a 318 833od

Print Thread

Re: 360 in a 318 833od [Re: QuickDodge] #3186429 10/25/23 01:57 PM 10/25/23 01:57 PM
Joined: Jul 2007 Posts: 4,927 Wills Point, Texas Hugh Jorgan master
Hugh Jorgan master Joined: Jul 2007 Posts: 4,927 Wills Point, Texas	The NP435 flywheel is 143 teeth. Also, the clutch from the NP435 should be 12" and 23 spline. The 833OD also uses a 23 spline clutch.

Entire Thread
Subject	Posted By	Posted
360 in a 318 833od	chargers777	10/24/23 11:48 PM
Re: 360 in a 318 833od	ruderunner	10/25/23 09:42 AM
Re: 360 in a 318 833od	QuickDodge	10/25/23 03:00 PM
Re: 360 in a 318 833od	Hugh Jorgan	10/25/23 05:57 PM
Re: 360 in a 318 833od	Hugh Jorgan	10/25/23 06:01 PM
Re: 360 in a 318 833od	Hugh Jorgan	10/25/23 06:03 PM
Re: 360 in a 318 833od	58pwrwgn	10/26/23 01:53 AM
Re: 360 in a 318 833od	chargers777	10/28/23 03:07 AM
Re: 360 in a 318 833od	ruderunner	10/28/23 10:23 AM
Re: 360 in a 318 833od	moparmarks	10/28/23 01:15 PM
Re: 360 in a 318 833od	QuickDodge	10/30/23 05:45 PM
Re: 360 in a 318 833od	Hugh Jorgan	10/30/23 06:31 PM
Re: 360 in a 318 833od	Hugh Jorgan	10/30/23 06:34 PM
Re: 360 in a 318 833od	QuickDodge	11/03/23 03:41 PM
Re: 360 in a 318 833od	Hugh Jorgan	11/03/23 04:22 PM
Re: 360 in a 318 833od	poorboy	11/03/23 11:09 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1