I should have mentioned that I buy non-insulated terminals; easier on the hands than cutting those plastic covers off   I Crimp/Solder and heat shrink with adhesive lined tube...every size. I use non insulated connectors from Del-City but there are other suppliers.
'01 P1500, Blown/Inj BAE,/Veney ,Bruno/CS2,Dana 60
'01 Dodge 3500 S Cummins Auto, Fresh air kit, 4" Exhaust,
'05 Dodge Magnum R/T - Too Much to list
'60 Willys CJ5
'01 International LPX - Project,DT466, Allison
'64 Plymouth Valiant, Inj 528 Hemi, 2spd
| 
