Pros and cons of using Chevy sized rods in hemi build

Print Thread

Re: Pros and cons of using Chevy sized rods in hemi build [Re: 440Jim] #3171020 08/28/23 10:42 AM 08/28/23 10:42 AM
Joined: Jan 2003 Posts: 9,892 Weddington, N.C. Streetwize master
Streetwize master Joined: Jan 2003 Posts: 9,892 Weddington, N.C.	the 2.200 is plenty strong and there are a lot more mopar length or longer rods today that have the proper mopar width. Back in the day all there was was the Eagle 7.100 which was basically a BB Chevy rod. The key with Hemis is the pistons are HEAVY but stroking them shortens the compression height and decreases the bobweight considerably. Should be no issues. WIZE World's Quickest Diahatsu Rocky (??) 414" Stroker Small block Mopar Powered. 10.84 @ 123...and gettin' quicker! https://www.youtube.com/watch?v=-mWzLma3YGI In Car: https://www.youtube.com/watch?v=PjXcf95e6v0

Entire Thread
Subject	Posted By	Posted
Pros and cons of using Chevy sized rods in hemi build	scottk	08/28/23 12:21 PM
Re: Pros and cons of using Chevy sized rods in hemi build	an8sec70cuda	08/28/23 01:02 PM
Re: Pros and cons of using Chevy sized rods in hemi build	'72CudaRacer	08/28/23 01:49 PM
Re: Pros and cons of using Chevy sized rods in hemi build	440Jim	08/28/23 02:23 PM
Re: Pros and cons of using Chevy sized rods in hemi build	Streetwize	08/28/23 02:42 PM
Re: Pros and cons of using Chevy sized rods in hemi build	rickseeman	08/28/23 02:47 PM
Re: Pros and cons of using Chevy sized rods in hemi build	scottk	08/28/23 03:34 PM
Re: Pros and cons of using Chevy sized rods in hemi build	polyspheric	08/28/23 04:21 PM
Re: Pros and cons of using Chevy sized rods in hemi build	Hemi_Joel	08/28/23 10:59 PM
Re: Pros and cons of using Chevy sized rods in hemi build	jcc	08/29/23 12:18 AM

Hop To