Originally Posted by A12
Originally Posted by DaveRS23
Before.

You may need plenty of rotation on the forward socket in order to get the T'bar installed. Then you can simply use a floor jack to get the spindle into the top ball joint.

Another tip for torsion bars that fight you to get in or out is to get a 1" steel rope clamp and use it to hammer on when getting the T'bar into or out of place.


I made this a while ago for torsion bar removal and installation, with a nice place to hit with a hammer or mallet. Works like a charm.

Mike


Here is a tool I purchased from Mancini to assist with torsion bar removal/install.

Mancini Racing Torsion Bar Removal/Install Tool