Head gasket selection - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Head gasket selection

Print Thread

Re: Head gasket selection [Re: INTMD8] #3128922 03/13/23 06:18 AM 03/13/23 06:18 AM
Joined: Aug 2008 Posts: 4,075 Mo. racerx OP master
racerx OP master Joined: Aug 2008 Posts: 4,075 Mo.	Originally Posted by INTMD8 I would use cometic. With as many layers as possible in the desired thickness. Could not pay me to use copper. Have you had a bad personal experience with copper gaskets?

Entire Thread
Subject	Posted By	Posted
Head gasket selection	racerx	03/12/23 02:00 PM
Re: Head gasket selection	INTMD8	03/12/23 02:57 PM
Re: Head gasket selection	racerx	03/13/23 10:18 AM
Re: Head gasket selection	INTMD8	03/13/23 03:05 PM
Re: Head gasket selection	Tig	03/13/23 03:13 PM
Re: Head gasket selection	Cab_Burge	03/12/23 08:00 PM
Re: Head gasket selection	572charger	03/13/23 01:16 AM
Re: Head gasket selection	racerx	03/13/23 10:16 AM
Re: Head gasket selection	racerx	03/13/23 10:28 AM
Re: Head gasket selection	GY3	03/13/23 03:39 PM
Re: Head gasket selection	an8sec70cuda	03/13/23 04:42 PM
Re: Head gasket selection	Cab_Burge	03/13/23 05:41 PM
Re: Head gasket selection	sasquatch	03/13/23 11:18 PM
Re: Head gasket selection	racerx	03/14/23 11:55 AM
Re: Head gasket selection	sasquatch	03/15/23 07:53 AM
Re: Head gasket selection	racerx	03/15/23 11:22 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1