I like to use less preload than a lot of guys on here, I shoot for 1/2 turn preload with aluminum heads at room temps, 1/4 to 1/3 turn on iron heads at room temps. which gives me between .012 to .020 when warm or hot up. I do reset them once warm up and shoot for 1/10 to 1/4 turn max preload with both types of heads wrench scope twocents
With less preload I believe you have less chance of floating the valves due to lifter pump up work scope

Last edited by Cab_Burge; 03/07/23 11:40 PM.

Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)