Building a Procharged 6.1 - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Building a Procharged 6.1

Print Thread

Building a Procharged 6.1 #3118648 02/03/23 03:58 PM 02/03/23 03:58 PM
Joined: Jan 2003 Posts: 5,762 Hot Rod Ridge FastmOp OP master
FastmOp OP master Joined: Jan 2003 Posts: 5,762 Hot Rod Ridge	Looking to see how much is needed to cut off heads and block to to gain a point of compression on a 2006 gen3 6.1 hemi. Any help is appreciated. Anything I should worry about? Just wanting to make a reliable bracket motor I can let my friends drive.

Entire Thread
Subject	Posted By	Posted
Building a Procharged 6.1	FastmOp	02/03/23 07:58 PM
Re: Building a Procharged 6.1	Cab_Burge	02/03/23 08:02 PM
Re: Building a Procharged 6.1	Dart 500	02/04/23 07:43 PM
Re: Building a Procharged 6.1	Cab_Burge	02/04/23 08:42 PM
Re: Building a Procharged 6.1	polyspheric	02/04/23 11:24 PM
Re: Building a Procharged 6.1	Dart 500	02/05/23 12:22 AM
Re: Building a Procharged 6.1	Uberpube	02/05/23 03:40 AM
Re: Building a Procharged 6.1	Cab_Burge	02/05/23 03:42 AM
Re: Building a Procharged 6.1	FastmOp	02/05/23 01:50 PM
Re: Building a Procharged 6.1	TheOtherDodge	02/06/23 06:40 PM
Re: Building a Procharged 6.1	Dragula	02/06/23 08:19 PM
Re: Building a Procharged 6.1	FastmOp	02/07/23 02:33 AM
Re: Building a Procharged 6.1	racerx	02/07/23 03:27 PM
Re: Building a Procharged 6.1	Cab_Burge	02/07/23 06:44 PM
Re: Building a Procharged 6.1	FastmOp	02/11/23 10:25 PM
Re: Building a Procharged 6.1	Uberpube	02/07/23 03:34 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1