Originally Posted by csk
Originally Posted by Torquemonster440
Originally Posted by rickraw
How about timing? Maybe more advance?


When checked with a timing light ,I'm all in at 38° at 2,000 rpm. Msd Pro billet dist mech advance only...no vac advance, Msd Digital box.


But what is the timing at idle, you should be in the 20 to 25 deg , & about 10 to 15 deg of mechanical advance
He'll never get that with MSD bushings. 18 degree is the smallest. So he's probably @20 initial. I had to get bushings from FBO, they are 10 and 14. I think he needs to find out whether his IFR is in the high or low position. Run a hose between the vent tubes with a hole on top in case fuel is coming out on a hard stop spilling into carb.

Last edited by carnut68; 01/10/23 07:08 PM.
America First!