Bore out lifter bores to .937 ? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Bore out lifter bores to .937 ?

Print Thread

Re: Bore out lifter bores to .937 ? [Re: hemienvy] #3097996 11/29/22 07:02 AM 11/29/22 07:02 AM
Joined: Oct 2007 Posts: 4,213 New York polyspheric master
polyspheric master Joined: Oct 2007 Posts: 4,213 New York	Thanks, that's thinner wall than I would have guessed. I'm working on an engine with .990" tappets being bushed down to take a different roller tappet. Boffin Emeritus

Entire Thread
Subject	Posted By	Posted
Bore out lifter bores to .937 ?	hemienvy	10/21/22 06:56 AM
Re: Bore out lifter bores to .937 ?	turbobitt	10/21/22 09:42 AM
Re: Bore out lifter bores to .937 ?	polyspheric	10/21/22 07:06 PM
Re: Bore out lifter bores to .937 ?	hemienvy	10/22/22 11:26 PM
Re: Bore out lifter bores to .937 ?	Hemi_Joel	10/23/22 12:39 AM
Re: Bore out lifter bores to .937 ?	turbobitt	10/23/22 03:26 AM
Re: Bore out lifter bores to .937 ?	INTMD8	10/23/22 05:34 AM
Re: Bore out lifter bores to .937 ?	hemienvy	10/23/22 09:47 AM
Re: Bore out lifter bores to .937 ?	LA360	10/23/22 12:21 PM
Re: Bore out lifter bores to .937 ?	Blucuda413	11/28/22 06:51 PM
Re: Bore out lifter bores to .937 ?	Brad_Haak	11/28/22 07:15 PM
Re: Bore out lifter bores to .937 ?	an8sec70cuda	11/28/22 07:32 PM
Re: Bore out lifter bores to .937 ?	Bad340fish	11/29/22 12:50 PM
Re: Bore out lifter bores to .937 ?	an8sec70cuda	11/29/22 01:28 PM
Re: Bore out lifter bores to .937 ?	mr_340	11/30/22 11:53 PM
Re: Bore out lifter bores to .937 ?	polyspheric	11/29/22 02:45 AM
Re: Bore out lifter bores to .937 ?	hemienvy	11/29/22 04:40 AM
Re: Bore out lifter bores to .937 ?	polyspheric	11/29/22 11:02 AM
Re: Bore out lifter bores to .937 ?	Cab_Burge	11/28/22 07:32 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1