Solid lift cam to roller Q's - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Solid lift cam to roller Q's

Print Thread

Re: Solid lift cam to roller Q's [Re: DaveRS23] #3097392 11/26/22 09:52 PM 11/26/22 09:52 PM
Joined: Aug 2009 Posts: 2,039 Mooresburg, Tn ' '72CudaRacer OP top fuel
'72CudaRacer OP top fuel ' Joined: Aug 2009 Posts: 2,039 Mooresburg, Tn	Originally Posted by DaveRS23 Changing the cam, lifters, push rods, and valve springs with plans to keep the same level of performance. Kinda curious as to why. Combo is well sorted out. Tired of trying to find a .590 & lifter kit and tried of dealing with junk cam & lifters. Brian

Entire Thread
Subject	Posted By	Posted
Solid lift cam to roller Q's	'72CudaRacer	11/27/22 12:26 AM
Re: Solid lift cam to roller Q's	Guicars	11/27/22 01:14 AM
Re: Solid lift cam to roller Q's	DaveRS23	11/27/22 01:36 AM
Re: Solid lift cam to roller Q's	'72CudaRacer	11/27/22 01:52 AM
Re: Solid lift cam to roller Q's	DaveRS23	11/27/22 02:13 AM
Re: Solid lift cam to roller Q's	an8sec70cuda	11/28/22 02:44 PM
Re: Solid lift cam to roller Q's	fast68plymouth	11/28/22 03:58 PM
Re: Solid lift cam to roller Q's	Cab_Burge	11/27/22 03:26 AM
Re: Solid lift cam to roller Q's	Brad_Haak	11/27/22 02:14 PM
Re: Solid lift cam to roller Q's	polyspheric	11/27/22 06:22 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1