Bearing Clearance Aluminum Hemi

Print Thread

Re: Bearing Clearance Aluminum Hemi [Re: mopar dave] #3097078 11/25/22 03:47 PM 11/25/22 03:47 PM
Joined: Jan 2007 Posts: 8,033 Mt Morris Michigan mopar dave OP master
mopar dave OP master Joined: Jan 2007 Posts: 8,033 Mt Morris Michigan	Just spoke with Ray Barton. He uses .0025-.003 on rods and no more than .004 on mains. All consistent info. http://www.youtube.com/watch?v=aIxaesJ190U http://youtu.be/lCZAaN7fFLg

Entire Thread
Subject	Posted By	Posted
Bearing Clearance Aluminum Hemi	mopar dave	11/23/22 01:20 PM
Re: Bearing Clearance Aluminum Hemi	440Jim	11/23/22 03:28 PM
Re: Bearing Clearance Aluminum Hemi	mopar dave	11/23/22 04:33 PM
Re: Bearing Clearance Aluminum Hemi	Cab_Burge	11/24/22 02:31 AM
Re: Bearing Clearance Aluminum Hemi	mopar dave	11/24/22 04:54 AM
Re: Bearing Clearance Aluminum Hemi	mopar dave	11/24/22 01:40 PM
Re: Bearing Clearance Aluminum Hemi	1980volare	11/24/22 04:00 PM
Re: Bearing Clearance Aluminum Hemi	rickraw	11/24/22 04:38 PM
Re: Bearing Clearance Aluminum Hemi	racerx	11/24/22 04:38 PM
Re: Bearing Clearance Aluminum Hemi	mopar dave	11/24/22 07:31 PM
Re: Bearing Clearance Aluminum Hemi	mopar dave	11/25/22 07:47 PM
Re: Bearing Clearance Aluminum Hemi	mopar dave	11/26/22 02:35 AM
Re: Bearing Clearance Aluminum Hemi	Gabby63	11/26/22 05:58 PM
Re: Bearing Clearance Aluminum Hemi	mopar dave	11/27/22 12:33 AM
Re: Bearing Clearance Aluminum Hemi	Cab_Burge	11/27/22 03:51 AM
Re: Bearing Clearance Aluminum Hemi	mopar dave	11/27/22 04:18 AM
Re: Bearing Clearance Aluminum Hemi	440Jim	11/27/22 03:47 PM
Re: Bearing Clearance Aluminum Hemi	mopar dave	11/27/22 07:12 PM
Re: Bearing Clearance Aluminum Hemi	an8sec70cuda	11/28/22 02:46 PM

Hop To